Ku band frequency shifter
FS-3004-01
 

 14-14.5GHz to 400-900MHz
 

 

  • Standard ku band operation.
  • Can be added to existing system.
  • Uses existing Rx cables for routing to analysers.
  • IP65 enclosure for outdoor use.
  • DC powered 9V DC - battery or 15 or 24V from HPAs.
  • Only 3dB extra loss in receive path.
  • Small size for ease of mounting.
  • C and Ku Band variants available.
  • Transmit band monitor point option

 

Shifter 

The FS3004-01 ku band frequency shifter converts signals from the monitor point on power amplifiers to a frequency which can be displayed on an L band spectrum analyser. The unit is connected to the monitor point of a power amplifier and applies a frequency conversion of 13.6GHz so that the monitored signal is converted to 400-900MHz (depending upon the transmit frequency). This signal is added to the L band signals from the LNB (950-1700MHz) for routing into the equipment room and for display on an L band spectrum analyser.

 


Specification:

DC requirements    9, 15 or 24V @ 200mA
DC connector           IP rated.
 

RF Specification
Receive path          950-1700 MHz
Path Loss               <3.5dB+/-0.5
I/p – o/p connectors   N Type (f)
 

Monitor path
I/p frequency          14-14.5GHz
O/p frequency         400-900MHz
Monitor Though loss   <12dB+/-1dB

 

Specification subject to change without prior notice